Application User Manual

1. CONNECTION

Connecting a Vehicle

After the successful login with your registered credential or by social media integration, the main button of the app will allow you to connect a vehicle provided of Bluetooth unit.

Just click the main button and follow the instructions.

Pairing process

Select your vehicle from the list on the screen. Remember that currently, connectivity is only available for the models that you see on this list.

 

Make sure the dashboard is switched on and follow these steps:

  • Select the 'Settings' menu of the dashboard
  • On the 'Configuration' page, select 'Pairing configuration'
  • In the Bluetooth settings of your smartphone, search for and pair with the device 'BT ROUTER'.
  • If asked enter the code ‘0000’ in order to confirm the pairinig

 

For using all the functionalities of your connected Moto Guzzi, when the app is connected, please remember to pair at least one headset by entering the ‘Device configuration’ page from the main button or from the menu page.

If a headset has been previously paired with the smartphone it is strongly recommended to remove it before performing the pairing process.

For V7-V9 Euro4 and V7 Special Euro5 vehicles, it is possible to pair the BT-Router in the first thirty seconds starting from the key on event.

Connection issues?

If you are experiencing difficulty pairing your vehicle, please check that:

 

  • Your smartphone has Bluetooth on
  • Your vehicle is on and the pairing process has been enabled
  • No other Bluetooth device is connected to the smartphone
  • If the issues persist you can try to clean the paired devices list by selecting the ‘reset pairing’ entry in the ‘pairing configuration’ page of the dashboard
  • Restarting the smartphone and/or the dashboard may also help in establishing connection

Connecting a headset to your Moto Guzzi

After pairing the vehicle, you can connect a headset to it.

 

Before starting the procedure please delete possible pairing of the headset from the smartphone in order to avoid conflicts while connecting the device.

 

In order to proceed, select the ‘Device Configuration’ sub-menu after pressing the main button while connected to the vehicle.

Pairing a headset

Set the device you'd like to connect in pairing mode.
Then select 'configuration' and 'search'.

 

Wait for the device you'd like to pair to appear in the list, then select it.
In the following screen, select the role of the device and pair it.
If you're experiencing difficulties, try repeating the search and pairing procedure.

 

It is possible to pair a second headset with the same procedure assigning to it the ‘headset passenger role’.
In this way you will enable the possibility to start the communication between the two headset managed by the Bluetooth Router of the bike.

2. MULTIMEDIA FUNCTION MANAGEMENT

Remote control of multimedia functions

Once the rider headset has been successfully paired and connected to the bike together with your smartphone (as indicated by the dedicated icons on the vehicle dashboard), you will be able to manage phone and audio function directly from the ‘mode’ selector.
The list of functions available is reported in the table below:

 

COMMANDS FOR V85-V9 Euro5

Music management

 

Play-Pause music -> short press of center button

Next track -> long press of up button

Previous track -> long press of down button

Volume up -> short press of up button

Volume down -> short press of down button

Stop music management -> long press of center button

 

Voice management

 

Answer incoming call -> short press of center button

Reject incoming call -> long press of center button

Recall last missed -> long press of center button

Volume up with active call -> short press of up button

Volume down with active call -> short press of down button

Dismiss lost call popup -> short press of any button

Activate intercom -> long press of down button when music or call are not active(selection from dashboard menu for V9)

Activate voice assistant -> long press of ‘heated grip’ button on the left of the handlebar (see vehicle user manual). Selection from dashboard menu for V9.

 

COMMANDS FOR V7 Stone Euro5

Music management

 

Play-Pause music -> short press

Next track -> double press

Previous track -> long press

Stop music management -> long press with music in pause

 

Voice management

 

Answer incoming call -> short press

Reject incoming call -> long press

Recall last missed -> long press

Dismiss lost call popup -> short press

Activate intercom -> selection from dashboard menu

Activate voice assistant -> Selection from dashboard menu

 

All the multimedia functions (eg. start of a playlist or starting a call) must be activated through voice commands keeping the hands on the handlebar.
The intercom function is available if two headsets with different roles (rider and passenger) have been paired and are actually connected to the vehicle.

 

WARNING: IF NO HEADSET IS CONNECTED TO THE VEHICLE NO MULTIMEDIA FUNCTION WILL WORK PROPERLY. WHEN A SMARTPHONE IS CONNECTED TO THE MOTO GUZZI MIA' SYSTEM ALL THE AUDIO STREAM ARE DIRECTED TO IT BY DEFAULT SO IT'S NOT POSSIBLE TO LISTEN AUDIO FROM SMARTPONE SPEAKERS OR HEADSET DIRECTLY CONNECTED TO THE SMARTPHONE UNLESS THE DESTINATION OF AUDIO IS MANUALLY SWITCHED.

 

WARNING: REMOTE VOLUME CONTROL MAY HAVE BEEN DISABLED BY THE HEADSET MANUFACTURER OR IMPLEMENT A PROPETARY PROTOCOL. FOR SUCH A REASON IN SOME CASES THE MIA SYSTEM MAY BE UNABLE TO REALIZE VOLUME CONTROL FROM THE HANDLEBAR.

3. VEHICLE MANAGEMENT

Your vehicle has been successfully connected

Now that your Moto Guzzi has been connected, you can access all the vehicle data simply by selecting the main button on the screen.

 

Remember, if your Moto Guzzi is not connected to your smartphone, you can still access the saved data of your last 30 trips and the overall aggregated data from the ‘Statistics’ tab.

 

Connections after pairing

Every time you use your Moto Guzzi, please remember to connect it to the app in order to save your trip statistics. After the first connection, if the app stays active or opened in background it will reconnect automatically as soon as you start again the dashboard.

 

Vehicle connected

This screen shows all the data and stats related to your Moto Guzzi.

Data from your Moto Guzzi

For your safety while riding the Interaction with the smartphone touch is disabled by default. Even if strongly discouraged, under your responsibility, you can turn off the screen lock by accessing the menu -> settings -> user preferences.

 

Total Mileage

The total mileage of your Moto Guzzi, as recorded by your dashboard even when not using the app. It is synchronized at every connection

 

App Mileage

The total mileage travelled with the App connected to your Moto Guzzi

 

Average consumption

The indicator of the average fuel consumption achieved during your trips traveled with the app connected.

 

Activities

It shows the main activities and the most recent notifications from your vehicle. In this section you can display a detailed log of your activities.

Vehicle data

 

Total travel time

It shows your total travel time specifying the number of hours and minutes that you've spent riding your Moto Guzzi while connected to the app.

 

Average speed

The average speed achieved when using the app during the last 30 trips.

 

Average Consumption

 

This graph shows the average consumption of your last 30 trips

 

Your stats and activities can be reset using the specific button only when your vehicle is not connected.
The units can be changed from metric to imperial measurement systems from the settings menu of the app.

Maintenance

 

Next servicing

It shows the number of kilometers left before your next servicing is due. When you approach or overcome the threshold, a notification will appear. Then, you can confirm you have serviced your vehicle to update the countdown to your next service.

 

Battery level

 

It shows the latest battery voltage registered. When your battery is running low, you'll receive a notification.

4. LIVE TRACKING

This screen shows the data tracked by your Moto Guzzi in real time while traveling. Remember that you can access such data only when your vehicle is connected to the App.

 

Dials

 

  • Instant fuel consumption indicator
  • Rear wheel slip percentage
  • Vehicle acceleration
  • Engine power

 

Secondary indicators of a single ride (reset every time the app gets disconnected)

 

  • Distance
  • Average speed
  • Average consumption
  • Battery voltage
  • Trip evaluation
  • Abs status
  • Traction control level

5. NAVIGATION MANAGEMENT

The Moto Guzzi V85 model is provided of integrated navigation management able to transfer the turn-by-turn indications from the smartphone app to the vehicle dashboard.

 

After the first successful connection of the app, the navigation function will be enabled and can be accessed from the dedicated widget in the home page or in the sub-menu opened by pressing the main button (only while connected).

 

It is possible to use the function when the app is not connected to vehicle but, in order to exploit its full potential, is suggested to have it linked with the vehicle.

 

If connected, as soon as a destination is selected and the navigation is started from the app, the dashboard will switch automatically to the dedicated navigation page and the info will start to be updated on it.

 

At every time it is possible to switch between the ‘navi’ page and the standard ‘drive’ page by long press of the mode selector in up position.

 

If the specific option is selected in the app user preferences, it is possible to manage the navigation directly from the handlebar.

 

By long press of the mode selector in up position it is possible to start the navigation to the last destination or, if a navigation process is already active, to stop it with the same command.

 

If the previous option is selected it won’t be possible to change dynamically the dashboard pages while turn.-by-turn navigation is running.

 

At the moment the app control from handlebar is available only on iOS devices and requires that the navigation map has been opened at least once during the app lifecycle. In addition, the function is disabled while music is playing or a call is incoming/active.

 

The navigation function is free of charge for three years from the first visualization of the map and the expiration date is reported in the ‘menu’ page.
The renewal of the function will be optional and managed through in-app purchase.
Non-intrusive reminders, instructions and related costs will be sent on the app approaching the expiration date.

 

At moment the navigation function is subjected to mobile data availability and effective GPS coverage.

 

Before selecting your destination, you can set your trip preferences and choose and download the language of your voice instructions from the specific navigation setting.

Navigation dashboard

Once in navigation mode, the dashboard will present the indications represented below with the following meaning:

 

A – Pictogram indicating the most imminent maneuver. In case of roundabout pictograms, the number indicates the exit number counted by ignoring the ones not allowed. The arrow indicates the approximate exit direction angle respect to the roundabout entry road.

 

B – Pictogram indicating the maneuver following ‘A’ and its distance from ‘A’. In this area also possible traffic control cameras will be represented.

 

C – Time and distance at arrival

 

D – Distance from maneuver ‘A’

 

E – Speed limit detected by the navigation function: must be considered as a generic indication. Always respect the actual speed limit indicated by the traffic signal

 

F – Address of the road or signpost indication of maneuver ‘A’

 

G – Array of icons indicating (left to right):

  • Connection of the app to the dashboard
  • Number of headsets connected to the bike
  • Connection of the smartphone music and voice functions to the bike

 

In some Countries the visualization of speed cameras position is not allowed by the law (eg. France, Germany, Austria) and, even if present, the indication may still be wrong.

 

The vehicle dashboard supports Latin alphabet only. For such a reason any string related to song titles incoming call id and road names coming in other not supported languages won’t be represented.
If the smartphone language selected by the user is not supported by the dashboard (eg. Greek, Russian, Chinese, Japanese…), the navigation maps and info will be translated in English when an equivalent indication is available.